Published 2026-09-14 · Baudouin engine parts · EPID
Most Baudouin 4M06G engine faults show up as one of a handful of symptoms. This guide maps each symptom to the likely cause and to the parts that fix it, so you can order once instead of twice.
Symptom to cause: quick reference
| Symptom | Likely cause | Parts to inspect |
|---|---|---|
| Blue smoke and rising oil consumption | Worn piston rings, glazed liners or turbo seals | Baudouin pistons and piston rings |
| Coolant loss with no visible leak | Failed liner O-rings, cavitation pitting or head gasket | Baudouin cylinder liner |
| Low oil pressure when hot | Worn main or rod bearings, worn oil pump, diluted oil | Baudouin engine bearings |
| Hard starting when hot | Injector wear, low compression, valve recession | Baudouin cylinder head |
| Knocking under load | Bearing clearance, incorrect timing, injector over-fuelling | Baudouin crankshaft |
| Overheating at low speed | Water pump impeller wear, thermostat, blocked radiator | Baudouin water pumps and oil pumps |
| White smoke on start-up | Coolant entering the cylinder, injector sleeve leak | Baudouin gasket kit |
| Power loss with black smoke | Turbocharger wear, restricted intake, injector nozzles | Baudouin turbochargers and injectors |
Blue smoke and oil consumption
Blue smoke means oil is being burned. On 4M06G engines the usual path is worn rings and glazed or oval liners, with the valve guides contributing on higher-hour engines. Before ordering, check the breather for blow-by: heavy blow-by confirms it is a cylinder unit problem rather than a turbo seal. Replace liners, pistons and rings as a set, and check liner protrusion when refitting.
Coolant loss without an external leak
If the coolant disappears but the ground stays dry, suspect the liner O-rings, cavitation pitting on the water side of a wet liner, or the head gasket. Cavitation damage is often visible as pitting between the O-ring grooves; once it starts, the liner must be replaced regardless of bore wear. Pressure-test the cooling system and inspect the oil for coolant before taking the engine apart.
Low oil pressure at operating temperature
Oil pressure that is acceptable cold and falls away hot almost always points to bearing clearance, a worn oil pump or fuel dilution. Measure the journals and select standard or oversize shells; replacing bearings without measuring the crankshaft is the most common reason a rebuild does not restore pressure. Check the relief valve and the pickup screen at the same time.
Hard starting when hot
Hot starting problems on 4M06G engines are usually fuel-side or compression-side. A worn injector that over-fuels when cold and under-fuels when hot is common; valve recession reduces compression as the engine reaches temperature. Flow-test the injectors and measure valve recession before deciding which side to repair.
When to repair, when to rebuild
- Repair: one failed component, oil pressure and blow-by within specification, engine hours low
- Inframe kit: cylinder unit and rod bearings worn, crankshaft sound, engine can stay in the chassis
- Full overhaul: low oil pressure plus blow-by plus coolant loss, or a bearing failure that has contaminated the oil circuit
Ordering the parts for these repairs
| Part number | Part | Model | |
|---|---|---|---|
| BAUDOUIN-DIESEL-ENGINE-CAMSHAFT-M-SERIES-ENGINE-612650050006 | Baudouin Diesel Engine Camshaft M Series Engine 612650050006 | camshaft | Details |
| BAUDOUIN-DIESEL-ENGINE-CRANKSHAFT-M-SERIES-ENGINE-612600020373 | Baudouin Diesel Engine Crankshaft M Series Engine 612600020373 | crankshaft | Details |
| ENGINE-CYLINDER-BLOCK-SUPPLIER-4M-6M-8M-12M-20M-SERIES | Engine Cylinder Block Supplier 4M 6M 8M 12M 20M Series | Original Baudouin Diesel Engine Parts | cylinder block | Details |
| BAUDOUIN-ENGINE-CYLINDER-HEAD-SUPPLIER-FOR-M-SERIES-ENGINE | Baudouin Engine Cylinder Head Supplier for M Series Engine | cylinder head | Details |
| BAUDOUIN-WEICHAI-DIESEL-ENGINE-CYLINDER-LINER-FOR-4M-6M-12M-20M-ENGINE | Baudouin Weichai Diesel Engine Cylinder Liner for 4M 6M 12M 20M Engine | cylinder liner | Details |
More: Baudouin part numbers - overhaul kits.